Table of Contents
Advertisement
Operating IntegratorRD Workstations
busy. See
Figure
A third way to respond to a call is by highlighting the call in the Call History Window,
using the STATUS UP and STATUS DOWN buttons or mouse, and then pressing the
CALL REPLY button. If this method of responding to a call is used, GRP/PVT call mode
setting is irrelevant.
Releasing the pressed XMIT, Reply, or right mouse button clears the BSY indication.
Figure 30: Channel Box Transmitting Indicators
BSY
Receiving a Status Message
A radio in the field can send a status update to the dispatcher. The received status is
displayed in the Call History Window along with the time and radio ID from which the
status was received.
The status numbers can be aliased to 10-character alphanumeric strings. Up to 20 status
messages are available.
The status reception condition clears automatically from the radio by the SDC Dual
Channel Card software to allow continued dispatching operation.
Receiving a Call Alert
A radio in the field can send a call alert to get the dispatcher to call back. The call alert is
displayed in the Call History window with a status of "--Alert--" along with the time,
radio ID, and channel from which the alert was received.
STOP
106
22.
Note
When responding to a call that is no longer active, the channel
must be in GRP mode to respond to Group calls and PVT mode for
private call, when using the above mentioned methods. The
current mode can be changed by pressing the CHAN MODE button.
Non‐Aliased
CHANNEL TITLE
GRP
Transmit..
1234
51
Warning! SDC infrastructure does not support Emergency Call at this
time. Therefore there is no audible alert for SDC call alerts.
Aliased
CHANNEL TITLE
GRP
Transmit..
John DOE
BSY
51
GRP: Group
PVT: Private
Calling unit radio ID
025-9535L
Advertisement
Table of Contents
