Table of Contents
Advertisement
Last Call Transmit (LAST <type>)
This button operates similarly to an INSTANT TRANSMIT button. It transmits on the
channel that received the last call. Three types of last call transmit buttons are available:
• Last Call Any Channel (LAST XMIT): This button transmits on the last channel
that received a call
• Last Call Selected Channel (LAST SEL): This button transmits on the last selected
channel that received a call
• Last Call Unselected Channel (LAST UNSEL): This button transmits on the last
unselected channel that received a call
Console Intercom Call/Talk (<name> CALL/I'COM TALK)
There are two buttons used for the interconsole intercom; the CONSOLE I'COM CALL
button and the CONSOLE I'COM TALK button. Pressing the CONSOLE I'COM
CALL button causes the called console to alert its operator by emitting a beep and
displaying "I-CALL". To talk to the called console, press and hold the CONSOLE
I'COM TALK button while speaking into the microphone. The intercom is turned off by
again pressing the CONSOLE I'COM CALL button that was recently pressed. While the
intercom is on (monitored) at your console, the green LED on the CONSOLE I'COM
TALK button is illuminated. While you are talking over the intercom, the red LED on the
CONSOLE I'COM TALK button is illuminated. There may be several CONSOLE
I'COM CALL buttons but only one CONSOLE I'COM TALK button. The CONSOLE
I'COM CALL button is usually labeled with the name of the console positions it calls,
such as "Fire Call" or "EMS Call".
Console Takeover (<name> T'OVER)
The supervisor position has the ability to take over any position by pressing the
CONSOLE TAKEOVER button for that position. The console position that is taken over
displays "TakeOver" and does not respond to any of its buttons. The console taken over is
released by the supervisor by again pressing the CONSOLE TAKEOVER button. While
a console is taken over, the red LED on the CONSOLE TAKEOVER button is
illuminated. There may be several CONSOLE TAKEOVER buttons, as many as there
are consoles in the system. The CONSOLE TAKEOVER button is usually labeled with
the name of the console it takes over, such as Fire T'over or Police T'over.
ANI Review (ANI REVIEW)
When your console is called from a field unit using ANI (Automatic Number
Identification), its unit number is shown on your time/message display. In addition, the red
LED on the ANI REVIEW button illuminates. To service the display and view the next
ANI in sequence (if any), press the ANI REVIEW button. When the last ANI has been
reviewed, the red LED on the button turns off.
Button Functions
23
Advertisement
Table of Contents
