Install 3Rd Party Pcie Cards; Installing 3Rd Party Pcie Cards - Magma EB4-1U User Manual

Install 3rd Party PCIe Cards

CAUTION
When installing PCIe cards, please ensure that the input current
rating specified on the AC input label is not exceeded.

Installing 3rd Party PCIe Cards

The EB4-1U chassis provides space for up to four (4) PCIe cards.
Generally, it makes no difference which PCIe slot you use when
installing your 3
unless specified by the card manufacturer. As can be seen in the
following graphic, each of the four PCIe slots has a sliding slot guide to
allow you to install any size PCIe card. Simply loosen the adjustment
screw for the slot you are using and slide is forward or backward until
the card fits snugly. Then tighten the adjustment screw and secure the
card to the slot cover using the screw provided.
the card's length.
rd
Party PCIe cards in the MAGMA expansion chassis,
can rotate the slot guard to make if fit.
and slide the guard to pivot hole, as shown, and
remove it. Next, rotate the slot guard 180° and
reinsert it. Finally, adjust the card slot guard to fit
Chapter 4
If your PCIe card is too short for
the adjustable card slot guides, you
Simply loosen
screw for the slot you are using
Install Cards and Drives
M A G M A
the adjustment
15