Configure Snmp Settings - Magma EB4-1U User Manual

M A G M A
To change the IP address, enter the new static IP address in the IP
Address field. Enter the new subnet mask in the Network Mask field.
Enter the IP addresses for the Gateway and the DNS Server in the
appropriate fields. Finally, enter the network name of the EB4-1U in the
DHCP Device Name field for use when accessing the chassis when
DHCP is enabled. If you wish to use DHCP, enter 0.0.0.0 in the IP
Address field.
When you have finished configuring the network settings, you can either
configure the SNMP settings as described in the next section, change
the default user name and password, or save the current changes by
clicking on the Submit New Settings button at the bottom of the
screen.
Now you can connect your chassis to the network. To find the IP
address assigned by your DHCP server, look in the DHCP server's list
of attached devices for the name you assigned to your EB4-1U chassis.
The default name is Magma_EB4-1U.

Configure SNMP Settings

If you are adding your EB4-1U chassis to an existing SNMP network, or
if you are planning to trap SNMP errors, you will need to configure the
SNMP settings for use with your SNMP agent.
20 Chapter 4 Install Cards and Drives