PCI Express Expansion Halted On Boot
Host Adapter Problem
1.
Make sure the Magma Host
Card is properly seated in the
host computer in a x8 or x4
PCI Express slot.
2.
Check the DIP switch
settings on the Magma Host
Card.
a.
PCI Express Expansion not seen in Device Manager
Expansion Chassis Problem
1.
Make sure the iPass cable from the host computer to the
chassis is properly installed.
2.
The bottom connector of the expansion chassis labeled 1
must be connected to the Magma Host Card.
The DIP switch
setting must be x8 if
the host card is
inserted into a x8
PCI Express slot.
PCI Express x4 slot
PCI Express x8 slot
Dip Switch
x4
o.k.
o.k.
Chapter 6
Troubleshooting
M A G M A
Dip Switch
x8
Not o.k.
o.k.
35