Table of Contents
Advertisement
M A G M A
If everything is OK, then the MAGMA expansion system installation is
rd
complete. You can now proceed to
Chapter 4
and install your 3
Party
PCIe Cards.
If, however, the installation was unsuccessful, you may not see the
PCIe to PCIe Bridge, or it will have a small yellow
in front of it.
Proceed to
Chapter 6 for Troubleshooting
installation problems.
Mac OS X
When using Mac OS X no additional software or drivers are needed. As
long as you are using Mac OS X Version 10.4 or newer, the operating
system should automatically recognize the MAGMA expansion chassis.
Select "About This Mac" under the Apple Icon
Then click the "More Info" button
click on the Devices tab
you
should see a pci-bridge device listed under PCIe as shown below:
12
Chapter 3
Verify Installation
Advertisement
Table of Contents
Troubleshooting
