Reset To Default Values; Configure Your Snmp Agent; Finishing Touches - Magma EB4-1U User Manual

Reset to Default Values

You can restore your EB4-1U chassis to the factory default values by
pressing and holding the Alarm Reset Button for 10 seconds the Power
LED will blink during this 10 second period. When all values have been
restored, the LED will stop blinking and turn off.
When you have finished changing the default user name and password,
you can either configure the network settings or configuring the SNMP
settings as described in previous sections, or save the current changes
by clicking on the Submit New Settings button at the bottom of the
screen.
IMPORTANT
The user name and password fields are case-sensitive.

Configure your SNMP Agent

If you use an SNMP agent to help you monitor your network, you will
find all necessary monitoring information in the MIB file available by
clicking the link at the bottom of the screen. It is located directly below
the Submit New Settings button.
After you click on the MIB file link, the information you need to configure
your SNMP agent will be displayed on the screen. You can save the
information to a text file local to the server if you wish.

Finishing Touches

After your system is working properly, replace any empty slots with slot
covers, replace the host computer cover, and the close the expansion
chassis carriage.
Chapter 4 Install Cards and Drives
M A G M A
23