Install Thunderbolt Interface card
The thunderbolt Interface card is already installed for this model. No need to install the Thunderbolt
Interface card.
If you need to replace or install a Thunderbolt Interface card, go to
Installation on Chapter 4.
Install PCIe Cards
Some card manufacturers recommend that you install their software driver prior to installing the card. If this
is the case, be sure to install the card driver before connecting Roben-3to the computer.
Slot 3 accepts all types of PCIe cards x1, x2, x4, x8 or x16
Slot 2 accepts all types of PCIe cards x1, x2, x4, x8 or x16
Slot 1 accepts all types of PCIe cards x1, x2, x4, x8 or x16 (next to Thunderbolt interface card)
Remove slot covers and install PCIe cards.
Thunderbolt Interface card
Roben 3 | Chapter 2
Hardware Installation
15
Magma