Protecting Against Electrostatic Discharge - Magma EB4-1U User Manual

M A G M A

Protecting Against Electrostatic Discharge

Electrostatic Discharge (ESD) Warning
Electrostatic Discharge (ESD) is the enemy of semiconductor
devices. You should always take precautions to eliminate any
electrostatic charge from your body and clothing before touching any
semiconductor device or card by using an electrostatic wrist strap
and/or rubber mat.
Static electricity can harm system boards. Perform service at an ESD
workstation and follow proper ESD procedures to reduce the risk of
damage to components. Magma strongly encourages you to follow
proper ESD procedures, which can include wrist straps and smocks,
when servicing equipment.
You can also take the following steps to prevent damage from
electrostatic discharge (ESD):
♦
When unpacking a static-sensitive component from its shipping
carton, do not remove the component's anti-static packaging
material until you are ready to install the component in a
computer. Just before unwrapping the anti-static packaging, be
sure you are at an ESD workstation or are grounded.
♦
When transporting a sensitive component, first place it in an
anti-static container or packaging.
♦
Handle all sensitive components at an ESD workstation. If
possible, use anti-static floor pads and workbench pads.
♦
Handle components and boards with care. Don't touch the
components or contacts on a board. Hold a board by its edges
or by its metal mounting bracket.
vi Preface