Install 3 Rd Party Pci Cards Or Hard Drives - Magma PE6R4-I User Manual

Pci expansion system; 6 slot pci express to pci-x
Hide thumbs Also See for PE6R4-I:
Table of Contents

Advertisement

M A G M A
CAUTION
When replacing the enclosure cover, be sure that the front edge of
the cover slides completely under the front lip of the enclosure.
rd
Install 3
Party PCI Cards or Hard Drives
CAUTION
When installing PCI cards or hard drives, please ensure that the input
current rating specified on the AC input label is not exceeded.
Six (6) PCI-X slots
One (1) non-operational slot – DO NOT USE
Daughter card with iPass connector interface on top of main backplane
Fan assembly with slot holders for full-length cards
400W, 100-240V/6.3A, 50-60HZ Power Supply
14
Chapter 4
Install Cards and Drives
Slide the enclosure cover backward to
disengage it from the guides at the
front of the enclosure by firmly
grasping the edges of the cover
lip
and
pulling
backward about 1" until it clears
the front hold-down, and then lift
the cover off.
Be careful to store the cover to
avoid damage while you are
working inside the chassis.
the
cover

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pe6rr-i

Table of Contents