Piping And Instrumentation Diagram - Salda SMARTY XP Mounting And Installation Instruction
Source: salda.lt/en, vetter-lufttechnik.de
Hide thumbs
Also See for SMARTY XP:
- Mounting and installation instruction (48 pages) ,
- Mounting and installation instruction (60 pages)
Table of Contents
Advertisement
• Remove the film from the unit.
• Remove the bracing packaging tape that keeps the protective profiles in place.
• Remove the protective profiles.
• After unpacking the unit, examine it to make sure that no damage was made during transportation.
Installation
of damaged units is not allowed!
• Before commencing the installation of the unit, please check if all ordered equipment
has
been delivered. Any
deviation
from the ordered equip-
ment list must be reported to the product supplier.
Figure 5.3.1.
Smarty XP
Figure 5.3.4.
Smarty 3X V / 4X V
Figure 5.3.2.
Smarty 2X V 1.1/1.2
Figure 5.3.3.
Smarty 2X V S300
5.4.
PIPING AND INSTRUMENTATION DIAGRAM
Figure 5.4.1.
SMARTY XP 1.1 (*Exhaust air sensor is not included with a device and should be ordered as an accessory;
** Check the manual for details; ***Not available in Smarty 2X P V1.1 units)
14
| EN
SMARTY v2023.2
Advertisement
Table of Contents
