Ceiling-Mounting Of The Unit (Smarty Xp); Floor Mounting (Smarty Xv); Wall-Mounting Of The Unit (Smarty Xv) - Salda SMARTY XP Mounting And Installation Instruction

5.5.2. CEILING-MOUNTING OF THE UNIT (SMARTY XP)

Figure 5.5.2.2. Drainage system installation (øD=150 mm) (only for units with condensation heat exchanger)
α
α
[mm]
NOTE. If the collector is located upstream, install the system with the condensate pump (offered as an accessory).
The diameter of the condensate pipe can't be reduced.
The condensate drain connection and siphon MUST be visible and easily serviced, otherwise the warranty will not apply!

5.5.3. FLOOR MOUNTING (SMARTY XV)

H
D

5.5.4. WALL-MOUNTING OF THE UNIT (SMARTY XV)

a
18 | EN
Figure 5.5.2.1. Ceiling-mounting of the unit
SMARTY 2X P
9
Figure 5.5.3.1. Floor mounting (optional accessory required)
30 mm
b
Figure 5.5.4.1. Mounting on the wall
α
SMARTY 3X P / 4X P
11
90
c
D
90
d
SMARTY v2023.2