Kenwood TM-733A Instruction Manual page 96

90
Press [F] (1s), [C.SEL] to activate Code Select.
+ The current DTSS code appears with the first
digit blinking.
fg moo) my my
;
Wnt
SANE
CALL Low
SHIFT TONE
Select the first digit for the DTSS code using the
Tuning control or the microphone [UP] or [DWN]
button.
Press [SHIFT].
+ The next digit in the code starts blinking.
yor
frag =
Ae |
CALL LOW SHIFT TONE
Repeat Steps 4 and 5 for the second and third
digits in the code.
Press [MHz] or [PTT].
+ The previous mode is restored.
g Using the Microphone DTMF Keypad
(U.S.A./Canada Versions)
equipped with an MC-45DM microphone.
* The previous mode is restored.
Note:
+ The other station is using a battery saver function.
* A repeater ID and the DTSS code are received
simultaneously.
press [PTT] again.