Kenwood TM-733A Instruction Manual page 104

6 Press [MHz] or [PTT] to restore the Display.
+ The previous mode is restored.
Repeat Steps 3 to 5 to unlock the Page code.
Note: You cannot lock-out Page memory 0 or A.
AUTO PAGE CANCEL
After successfully paging another station, it is useful to
turn OFF Page to eliminate sending a Page code each
time you transmit. Auto Page Cancel handles this
situation automatically when a station you called
responds using the correct Page code to open your
transceiver's squelch. On your next transmission, your
transceiver then switches OFF your transceiver's Page
function.
Press [F]+[DTSS] to toggle Auto Page Cancel ON or
OFF.
"ON" appears briefly on the lower right corner of the
Display when the function is switched ON. The
default is OFF.
SEL EEETar 6)
98
OPEN PAGE
When both this function and Page are ON, any signal
opens the squelch; however, if a correct Page code is
received, the calling station's code appears on the
Display. This feature is beneficial when you want to
generally monitor activity on a frequency but you want
to be especially sure not to miss a friend's call.
+ Press [BAND SEL] for the band that you want to
use since Open Page can be activated on each
band independently.