Kenwood TM-733A Instruction Manual page 82

m@ Microphone Lock
One application for this function could be when
using the DATA connector for Packet. You may want
the microphone handy for voice contacts but, in
general, you don't use the control functions offered
by the microphone. This function is also handy to
prevent changing your transceiver settings by
touching the wrong button or key on the microphone
while holding it.
Use the slide switch on the microphone rear to
select the Microphone Lock status.
w All Lock
All Lock is ideal when you have no plans to transmit
but you want to monitor a specific channel.
1 Press [F], [MHz].
+ "LOCK" appears.
2 Press [PWR] to switch OFF the transceiver
power.
3 Press [MHz]+ POWER ON.
+ "A.LOCK" appears. Pressing a locked button
generates an alarm beep.
f nr
} 435g
{eyo
, ggg
CALL LOW SHIFT TONE REV@ MUTE
4 To deactivate All Lock, press
[MHz]+ POWER ON, then press [F], [MHz].
76
AUTOMATIC POWER OFF (APO)
1 Press [F] (1s), [MHz].
+ "APO" appears. The default is OFF.
Fi
/.g17n
Ye sles
LOW SHIFT TONE REV® MUTE
Note: