Kenwood TM-733A Instruction Manual page 109

SERVICE NOTE CLEANING
Dear YL/OM, The buttons, controls and case of the transceiver are
likely to become soiled after extended use. Remove
the controls from the transceiver and clean them with a
neutral detergent and warm water. Use a neutral
detergent (no strong chemicals) and a damp cloth to
1 Model and serial number of equipment clean the case.
2 Question or problem you are having
If you desire to correspond on a technical or operational
problem, please make your note short, complete, and to
the point. Help us help you by providing the following:
3 Other equipment in your station pertaining to the
problem
4 Meter readings
§ Other related information
CAUTION: Do not pack the equipment in crushed newspapers for
shipment! Extensive damage may result during rough handling or
shipping.
Note:
¢@ Record the date of purchase, serial number and dealer from
whom the transceiver was purchased.
¢@ For your own information, retain a written record of any
maintenance performed on the transceiver.
@ When claiming warranty service, please include a photocopy of
the bill of sale, or other proof-of-purchase showing the date of
sale.
103