Kenwood TM-733A Instruction Manual page 56

Full Reset excluding Programmable Memory
This reset initializes everything possible on the
transceiver except the Programmable Memory
channels {page 51}. After using this function, all
memory channels as well as all other programmable
data excluding Programmable Memory channel data
must be re-entered.
1 Press [MR]+ POWER ON.
+ The Programmable Memory channel numbers
begin blinking. The following blinking
confirmation message appears:
"OK?0K-MR KEY".
2 Press [F].
+ The Programmable Memory channel numbers
on the Display disappear.
3 Press [MR].
+ The transceiver beeps and resets.
+ Press any other button to cancel the function.
a Full Reset including Programmable Memory
This reset initializes everything possible on the
transceiver. After using this function, all memory
channels and Programmable Memory channels
{page 51} as well as all other programmable data
must be re-entered.
1 Press [MR]+ POWER ON.
"OK?0K-MR KEY".
+ The transceiver beeps and resets.
TM-733 Defaults
Version VFO Frequency
Frequency Step Tone Frequency
VHF UHF
Canada/U.S.A. | 144.000 MHz | 440.000 MHz
VHF UHF VHF UHF
5 kHz
88.5 Hz 88.5 Hz
Europe 144.000 MHz | 430.000 MHz
12.5 kHz
1750 Hz 1750 Hz
50
General 144.000 MHz | 430.000 MHz
12.5 kHz
88.5 Hz 88.5 Hz