Kenwood TM-733A Instruction Manual page 47
144/430/440 mhz fm dual bander
Hide thumbs
Also See for TM-733A:
- Instruction manual (123 pages) ,
- Instruction manual (63 pages) ,
- Instruction manual (122 pages)
Table of Contents
Advertisement
MEMORY CHANNELS
VHF/UHF MEMORY CHANNEL RATIO
1 Press [F]+[MR]+ POWER ON to select the memory
channel configuration mode.
The transceiver has a total of 70 memory channels for
9
storing frequencies and related data. This total number
* The current configuration appears. The left
band. The chart lists the different memory
configurations available.
/
a
CALL
LOW
SHIFT
TONE
REVG@
MUTE
Configuration
VHF Band
UHF Band
2 Turn the Tuning control, or press microphone
[UP]/[DWN], until the configuration you prefer
appears on the Display.
3 Press [MR] to store your choice.
+
Pressing any other button cancels the
configuration mode. The previous memory
channel configuration remains valid.
Note:
The VHF/UHF memory channel configuration must be done
before storing any data in memory channels.
Changing
configurations erases all memory channels except memory
channel 1.
41
Advertisement
Table of Contents
