Kenwood TM-733A Instruction Manual page 8

CONVENTIONS FOLLOWED IN THIS MANUAL
The writing conventions described below have been
followed to simplify instructions and avoid unnecessary
repetition. This format is less confusing for the reader.
Reviewing the following information now will reduce
your learning period. That means less time will be
spent reading this manual; more time will be available
for operating.
Note:
¢@ Basic procedures are numbered sequentially to guide you step-
by-step. Additional information pertaining to a step, but not
essential to complete the procedure, is provided in bulleted form
following many steps for further guidance.
¢ Most procedures require that you enter a final key stroke that acts
as a terminator for the procedure. You can, if you prefer, wait for
approximately 10 seconds rather than enter this final key entry.
Instruction What to do
Press
[KEY].
Press and release KEY.
Press
[KEY 1]+[KEY2].
Press and hold KEY1 down,
then press KEY2.
Press
[KEY1], [KEY2].
Press KEY1 momentarily,
release KEY1, then press
KEY2.
Press
[KEY]+ POWER ON.
With transceiver power OFF,
press and hold KEY, then turn
ON the transceiver power by
pressing [PWR].
Press
[KEY1]+[KEY2]+
POWER ON.
With the transceiver power
OFF, press and hold both
KEY1 and KEY2 down, then
turn ON the transceiver power}
by pressing [PWR].
Press
[F] (1 s).
Press and hold the Function
key until the "F" indicator on
the Display begins blinking.
Press
[KEY] (1s).
Press and hold KEY until the
function begins.
Press
[F], [KEY] (1s).
Press [F] momentarily,
release [F], then press and
hold KEY for 1 second or
longer.