Table of Contents
Advertisement
SICAM FSI Configurator
5.3 Configurator Installation
5.3
Configurator Installation
SICAM FSI Configurator Installation
5.3.1
Before installing the SICAM FSI Configurator on the PC or laptop computer, download the SICAM FSI Configu-
rator (Setup.exe) from the following Siemens Internet page:
https://support.industry.siemens.com/cs/ww/en/view/109822242
representative
To install the SICAM FSI Configurator, proceed as follows:
Double-click the Setup.exe.
²
The following Welcome Setup screen appears if the SICAM FSI Configurator is installed for first time.
[Picture1, 1, --_--]
Figure 5-1
Click Next > to install the SICAM FSI Configurator in the destination folder.
²
Siemens recommends keeping the SICAM FSI Configurator installation in the following default folder:
C:\Program Files (x86)\Siemens Energy\SICAM FSI\
72
SICAM FSI Configurator Setup – Welcome Screen
or distributed by the siemens customer care
SICAM, Fault Sensor Indicator V2.0 B-Sensor, Manual
E50417-H8940-C656-A1, Edition 08.2023
Advertisement
Table of Contents
Troubleshooting
