Siemens SICAM V01.00 Manual page 5

Standards
IEC 62689-1
Customer Support Center
Our Customer Support Center provides a 24-hour service.
Siemens AG
Smart Infrastructure – Protection Automation
Customer Support Center
Additional Support
For questions about the system, contact your Siemens sales partner.
Training Courses
Inquiries regarding individual training courses should be addressed to our Training Center:
Siemens AG
Siemens Power Academy TD
Humboldtstraße 59
90459 Nuremberg
Germany
Notes on Safety
This document is not a complete index of all safety measures required for operation of the equipment (module
or device). However, it comprises important information that must be followed for personal safety, as well
as to avoid material damage. Information is highlighted and illustrated as follows according to the degree of
danger:
!
DANGER
DANGER means that death or severe injury will result if the measures specified are not taken.
Comply with all instructions, in order to avoid death or severe injuries.
²
!
WARNING
WARNING means that death or severe injury may result if the measures specified are not taken.
Comply with all instructions, in order to avoid death or severe injuries.
²
!
CAUTION
CAUTION means that medium-severe or slight injuries can occur if the specified measures are not taken.
Comply with all instructions, in order to avoid moderate or minor injuries.
²
SICAM, Fault Sensor Indicator V2.0 B-Sensor, Manual
E50417-H8940-C656-A1, Edition 08.2023
Tel.: +49 911 2155 4466
E-Mail: energy.automation@siemens.com
Phone: +49 911 9582 7100
E-mail: poweracademy@siemens.com
Internet: www.siemens.com/poweracademy
Preface
5