Getting Started
3.4 SICAM FSI Mounting
•
Mount the device adaptor on the telescopic hot stick.
Make sure that the device adaptor is mounted at the right angles to the telescopic hot stick.
[le_sfsi_telhotdevadap, 1, --_--]
Figure 3-15
(1)
(2)
(3)
•
Following figure shows the correct positioning of device adaptor on the telescopic hot stick.
[dw_sfsi_devadapcorrect, 1, en_US]
Figure 3-16
36
Mounting Device Adaptor on the Telescopic Hot Stick
Device adaptor
Bottom flange of device adaptor
Telescopic hot stick
Correct Position of Device Adaptor on the Telescopic Hot Stick
SICAM, Fault Sensor Indicator V2.0 B-Sensor, Manual
E50417-H8940-C656-A1, Edition 08.2023