Siemens SICAM V01.00 Manual page 119

•
Remove the battery cover by unscrewing the 3 M3 screws (using torque: 0.5 Nm) using a Phillips
screwdriver of tip size 1. Take out the old batteries from the device
[le_sfsi_batrep_removebat, 1, --_--]
Figure 8-3
•
Unpack the new batteries. Place the new batteries in the housing in the slots of the battery holder.
Ensure that the side of the battery where the cables emerge from the battery terminal is in direct
contact with the battery holder.
– B-Sensor Type 1: 2 batteries to be put
– B-Sensor Type 2: 3 batteries to be put
[le_sfsi_batrep_replacebat, 1, --_--]
Figure 8-4
SICAM, Fault Sensor Indicator V2.0 B-Sensor, Manual
E50417-H8940-C656-A1, Edition 08.2023
Removal of Battery Cover and Old Batteries
Placing New Batteries
Maintenance
8.2 Battery Replacement
119