SICAM FSI Configurator
5.6 Dashboard
5.6
Dashboard
SICAM FSI Configurator Dashboard
5.6.1
Based on the selected COM port, you can connect and log on to the SICAM FSI Configurator. After successful
log on, the Dashboard page appears and contains the following pages:
•
Device Information
•
Settings
[Picture8, 1, --_--]
Figure 5-15
Device Information
5.6.2
The device information page displays the following:
•
Device health status
•
Battery status
•
Bootloader version
•
Firmware version
•
SICAM FSI Configurator (Application software) version
•
Wireless communication
–
NO — Non-communicable SICAM FSI (No Zigbee module)
NOTE
i
i
The value of parameter Wireless Communication in the device information page is set to NO and will
remain constant.
NOTE
i
i
The device information parameters are read-only for the engineer role.
Click the SICAM FSI tile under Device Information.
²
86
SICAM FSI Configurator Dashboard
SICAM, Fault Sensor Indicator V2.0 B-Sensor, Manual
E50417-H8940-C656-A1, Edition 08.2023