•
Match the device adaptor square holes on the telescopic hot stick teeth, so that they fit in place.
[le_sfsi_devadapsquthruholes, 1, --_--]
Figure 3-17
(1)
(2)
•
Hold the device adaptor firmly on the telescopic hot stick and completely tighten the wing bolt.
[dw_sfsi_telhotwingbolttight, 1, --_--]
Figure 3-18
SICAM, Fault Sensor Indicator V2.0 B-Sensor, Manual
E50417-H8940-C656-A1, Edition 08.2023
Matching Device Adaptor Square Holes on the Telescopic Hot Stick
Device adaptor square holes
Telescopic hot stick teeth
Tighten the Wing Bolt of Telescopic Hot Stick
Getting Started
3.4 SICAM FSI Mounting
37