Table of Contents
Advertisement
64
1-2. Child safety
restraint system.
Rear-facing Infant
■
seat/convertible seat
1
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
2
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
3
Fully extend the shoulder belt
and allow it to retract to put it
Owners Manual_USA_M04041_en
in lock mode. In lock mode,
the belt cannot be extended.
4
While pushing the child
restraint system down into
the rear seat, allow the shoul-
der belt to retract until the
child restraint system is
securely in place.
After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
5
After installing the child
restraint system, rock it back
and forth to ensure that it is
installed securely. (P.68)
Forward-facing Convert-
■
ible seat
Before installing the child
restraint to the rear seat:
If the child restraint has a top
tether strap, install the top tether
Advertisement
Table of Contents
