Table of Contents
Advertisement
WARNING
Depending on the circumstances of the vehicle (number of passengers,
●
amount of luggage, etc.), the position of the guide lines displayed on the
screen may change. Be sure to check visually around the vehicle before
proceeding.
If the steering wheel is straight and the vehicle width guide lines and the
●
estimated course lines are not in alignment, have the vehicle inspected
by your Toyota dealer.
Do not use the system if the display is incorrect due to an uneven (hilly)
●
road or a non-straight (curvy) road.
Changing the rear view mode
Each time press the zoom button, the mode will change as follows:
Wide rear view
Narrow rear view
Hitch zoom view
The hitch zoom view can be displayed for a certain time when
●
pressed while the driving at speeds of 10 mph (16 km/h) or more.
The hitch zoom view and bed zoom view (P.376) can be switched when
●
the switch is pressed while the displaying the screen.
Using the rear split view
If towing a trailer, magnify the difficult to see section of the vehicle
rear or change the screen display and use when checking.
Owners Manual_USA_M04041_en
4-5. Using the driving support systems
373
4
is
Advertisement
Table of Contents
