Table of Contents
Advertisement
Replacing light bulb
Front turn signal/parking
■
lights (bulb type)
1
Remove the 4 push clips and
air cleaner inlet. (for passen-
ger's side only)
2
Turn the bulb base counter-
clockwise.
3
Remove the light bulb.
Owners Manual_USA_M04041_en
6-3. Do-it-yourself maintenance
4
Install a new light bulb and
turn the bulb base clockwise.
5
Install the air cleaner inlet
and 4 push clips. (for passen-
ger's side only)
WARNING
Replacing light bulbs
■
Turn off the lights. Do not
●
attempt to replace the bulb
immediately after turning off the
lights. The bulbs become very
hot and may cause burns.
Do not touch the glass portion
●
of the light bulb with bare
hands.
When it is unavoidable to hold
the glass portion, use and hold
with a clean dry cloth to avoid
getting moisture and oils on the
bulb. Also, if the bulb is
scratched or dropped, it may
blow out or crack.
Fully install light bulbs and any
●
parts used to secure them. Fail-
ure to do so may result in heat
damage, fire, or water entering
the light unit. This may damage
the lights or cause condensa-
tion to build up on the lens.
To prevent damage or fire
■
Make sure bulbs are fully seated
and locked.
557
6
Advertisement
Table of Contents
