Toyota Tacoma 2024 Manual page 483

not operate properly:
Devices with high initial peak watt-
●
age
Measuring devices that process
●
precise data
Devices that require an extremely
●
stable power supply
Devices that require a constant
●
power supply from the power out-
let, such as a device with a timer.
Operating the Stop & Start sys-
■
tem (if equipped)
When the engine restarts from the
engine stopped state due to the
operation of the Stop & Start sys-
tem, the accessory outlet may be
temporarily unavailable, however
this is not a malfunction. Pressing
the "AC120V" switch again will
enable the accessory outlet to be
used.
When the power supply func-
■
tion cannot be used
If the "AC120V" switch is pressed
but the switch indicator does not illu-
minate, the protection circuit may
have operated.
In this case, perform the appropriate
procedures as follows.
Disconnect the plug of each
●
device from the power outlets,
check that the total power con-
sumption of all devices to be con-
nected to the power outlets,
reconnect the devices and then
press the "AC120V" switch again.
Disconnect the plug of each
●
device from the power outlets,
check that the devices are not
malfunctioning, reconnect the
devices and then press the
"AC120V" switch again.
If the temperature inside the vehi-
●
cle is high, such as after the vehi-
cle has been parked under the
sun, move the vehicle to a shaded
area, use the air conditioning sys-
tem to sufficiently cool the interior,
and then press the "AC120V"
Owners Manual_USA_M04041_en
5-4. Using the other interior features
switch again.
If the power outlets cannot be used
even after performing the appropri-
ate procedures above, have the
vehicle inspected by your Toyota
dealer.
If any electrical device has mal-
●
functioned, park the vehicle in a
safe location and turn the
"AC120V" switch off.
If the protection function activates
●
and power is cut, perform the fol-
lowing procedure.
1
Stop the vehicle in a safe place
and set the parking brake.
2
Ensure that the shift lever is in P
(automatic transmission) or N.
3 Check that the power consumed
by the electrical devices is within
400 W and any device has not
malfunctioned.
4
Press the "AC120V" switch.
If the inside of the vehicle is hot,
open the windows to lower the tem-
perature and turn the switch back on
once the inside of the vehicle
reaches a normal temperature. If
following the procedure above does
not restore power, have the vehicle
inspected at your Toyota dealer.
WARNING
For safe use
■
Observe the following precau-
tions.
Failure to do so may lead to an
accident, resulting in death or
serious injury.
Do not use devices such as the
●
following when driving:
• Devices which cannot be prop-
erly secured within the vehicle.
485
5