Table of Contents
Advertisement
3-2. Opening, closing and locking the doors and tailgate
WARNING
The jam protection function may
●
not work if something gets
caught just before the tailgate
fully closes. Be careful to not
get fingers or anything else
caught.
The jam protection function may
●
not work depending on the
shape of the object that is
caught. Be careful to not get fin-
gers or anything else caught.
NOTICE
To prevent tailgate closer
■
malfunction
Do not apply excessive force to
the tailgate while the tailgate
closer is operating. Applying
excessive force may cause the
tailgate closer to malfunction.
To prevent damage to the
■
power tailgate
Make sure that there is no ice
●
between the tailgate and frame
that would prevent movement of
the tailgate. Operating the
power tailgate when excessive
load is present on the tailgate
may cause a malfunction.
Take care not to damage the
●
sensors (installed on the right
and left edges of the power tail-
gate) with a knife or other sharp
object. If the sensor is discon-
nected, the power tailgate will
not close automatically.
Owners Manual_USA_M04041_en
Changing settings of the
power tailgate system
(vehicles with power tail-
gate)
The settings of the power tail-
gate system can be changed by
displaying the
(vehicles with
7-inch display) or "
(vehicles with 12.3-inch display)
-
screen from the setting
screen of the multi-information
display.
The changed power tailgate set-
tings are not reset by turning the
engine switch to OFF. In order to
restore the original settings, they
need to be changed back on the
setting screen of the multi-informa-
tion display.
Removing the tailgate
Before removing the tail-
■
gate
Turn the tailgate opening alert
and power tailgate system (if
equipped) off before removing
the tailgate. (P.138, 143)
Use the connector covers when
removing the tailgate to prevent
the wire harness connectors
from being contaminated.
143
Settings"
3
Advertisement
Table of Contents
