Table of Contents
Advertisement
System components
Meter control switches
Turning the RCTA function on/off.
Outside rear view mirror indi-
cators
When a vehicle approaching from
the right or left at the rear of the
vehicle is detected, both outside
rear view mirror indicators will flash.
Multimedia display
If a vehicle approaching from the
right or left at the rear of the vehicle
is detected, the RCTA icon
(P.324) for the detected side will
be displayed on the multimedia dis-
play. This illustration shows an
example of a vehicle approaching
from both sides of the vehicle.
RCTA buzzer
If a vehicle approaching from the
right or left at the rear of the vehicle
is detected, a buzzer will sound.
Owners Manual_USA_M04041_en
4-5. Using the driving support systems
The buzzer also sounds for approx-
imately 1 second immediately after
the RCTA function is turned on.
Turning the RCTA func-
tion on/off
The RCTA can be enabled/dis-
abled through a customize set-
ting. (P.645)
When the RCTA function is dis-
abled, the driving assist information
indicator (P.85) illuminates. (Each
time the engine switch is turned off
then changed to ON, the RCTA
function will be enabled automati-
cally.)
■
When towing a trailer
●
When Auto Trailer Detection
(ATD) (P.311) is activated, the
function automatically turns off.
●
When the shift position is in R, the
intuitive parking assist OFF indica-
tor (P.85) turns ON
■
Outside rear view mirror indica-
tor visibility
In strong sunlight, the outside rear
view mirror indicator may be difficult
to see.
■
Hearing the RCTA buzzer
The RCTA buzzer may be difficult to
hear over loud noises, such as high
audio volume.
■
When "Rear Cross Traffic Alert
Unavailable" is shown on the
multi-information display
The sensor voltage has become
abnormal, or water, snow, mud, etc.,
may be built up in the vicinity of the
sensor area of the rear bumper.
(P.310)
Removing the water, snow, mud,
etc., from the vicinity of the sensor
area should return it to normal. Also,
323
4
Advertisement
Table of Contents
