Table of Contents
Advertisement
166
3-4. Adjusting the steering wheel and mirrors
can also be changed while using
the digital mirror mode.
Enabling/disabling the
■
automatic anti-glare func-
tion (optical mirror mode)
The automatic anti-glare func-
tion in the optical mirror mode
can be enabled/disabled. The
setting can be changed in both
the digital mirror mode and the
optical mirror mode.
When using the digital mirror
mode
P.165
When using the optical mirror
mode
1
Press the menu button.
The icons will be displayed.
2
Press the menu button
repeatedly and select
The setting display will be dis-
played.
3
Press
enable ("ON")/disable
("OFF") the automatic anti-
glare function.
The icons will disappear if a button
is not operated for approximately 5
Owners Manual_USA_M04041_en
seconds or more.
■
●
●
●
■
To prevent the light sensors from
malfunctioning, do not touch or
cover them.
.
or
to
Adjusting the display (digital
mirror mode)
If the displayed image is adjusted,
it may appear distorted. This is not
a malfunction.
If the brightness of the Digital
Rear-view Mirror is set too high, it
may cause eye strain. Adjust the
Digital Rear-view Mirror to an
appropriate brightness. If your
eyes become tired, change to
optical mirror mode.
The brightness of the Digital Rear-
view Mirror will change automati-
cally according to the brightness
of the area in front of your vehicle.
To prevent the light sensors
from malfunctioning
WARNING
Observe the following precau-
tions.
Failure to do so may result in
death or serious injury.
Advertisement
Table of Contents
