Table of Contents
Advertisement
432
4-5. Using the driving support systems
"Trailer Direction"
When using Straight Path Assist,
the driver can override the system
using the steering wheel to adjust
the trailer direction. Upon release of
the steering wheel, Straight Path
Assist re-activates with a revised
straight back target direction.
■
When adding the trailer
Select "Trailer Settings" on the
multi-information display and add a
trailer according to the display.
(P.103, 112)
Trailer Settings are not available
while Trailer Backup Guide system
is active.
The system is designed to support
trailers with single or multi-axles
using a ball hitch. The system does
not support fifth wheel or gooseneck
trailers.
Setup (Calibration)
Bring the vehicle and trailer to a
large open space like an empty
parking lot. Activate Trailer
Backup Guide system and fol-
low the instructions displayed on
the multi-information dis-
play/multimedia.
For best calibration results, do
not exceed 5 mph (8 km/h).
1
Drive straight forward slowly
Owners Manual_USA_M04041_en
(5 mph [8 km/h] or less) while
holding the steering wheel
straight.
2
Stop vehicle with trailer
straight and confirm blue line
is aligned with trailer center
in Camera view.
3
Drive forward slowly making
a left or right turn that
changes vehicle direction 90
degrees or more.
4
After completing the turn,
continue straight forward
slowly to align trailer.
5
Stop vehicle to complete cali-
bration.
■
When calibrating the system
●
Please check whether the blue
line appropriately aligns with the
center of the trailer in the camera
view, such as in the following dia-
gram, with regards to procedure
2.
Advertisement
Table of Contents
