Toyota Tacoma 2024 Manual page 343

Table of Contents

Advertisement

Display mode switching but-
ton
Each time the button is selected,
the rear view mode and the wide
rear view mode are switched.
Guide line switching button
Select to switch the guide line
mode. (P.345)
• Each time the button is selected,
the display mode changes in the
following order:
Estimated course line display mode
 Parking assist guide line display
mode  Distance guide line display
mode  Center guide line display
mode.
Rear Cross Traffic Alert
When a sensor detects a vehicle
approaching from the rear, the
direction of the vehicle approaching
from the rear is displayed and the
buzzer sounds.
Rear Camera Detection
When a sensor detects a vehicle
approaching from the rear, the
direction of the vehicle approaching
from the rear is displayed and the
buzzer sounds.
Intuitive parking assist
When a sensor detects a stationary
object, the direction of and the
approximate distance to the a sta-
tionary object are displayed and the
buzzer sounds.
*
: If equipped
For details about the Rear Cross
Traffic Alert function (P.322) and
intuitive parking assist. (P.316)
Owners Manual_USA_M04041_en
4-5. Using the driving support systems
WARNING
As the Rear Cross Traffic Alert
display is displayed over the
camera view, it may be difficult
to see the Rear Cross Traffic
Alert display depending on the
color and brightness of the sur-
rounding area.
Canceling Toyota parking
assist monitor
The parking assist monitor is
canceled when the shift lever is
shifted into any position other
than R.
Using the system
*
Use any of the following modes.
*
Estimated course line display
*
mode (P.346)
Estimated course lines are dis-
played which move in accor-
dance with the operation of the
steering wheel.
345
4

Advertisement

Table of Contents
loading

Table of Contents