Table of Contents
Advertisement
288
4-5. Using the driving support systems
■
Adjusting the set vehicle
speed
Adjusting the set vehicle
speed using the switches
To change the set vehicle
speed, press the "+" switch or "-"
switch until the desired speed is
displayed.
1
Increase set vehicle speed
2
Decrease set vehicle speed
Short press adjustment: Press the
switch
Long press adjustment: Press and
hold the switch until the desired set
vehicle speed is reached.
The set vehicle speed will
increase or decrease as follows:
For U.S.A.
Short press adjustment: Increases
or decreases by 1 mph (1.6 km/h)
each time the switch is pressed
Long press adjustment: Increases
or decreases in 1 mph (1.6 km/h)
increments continuously while the
switch is pressed and held
Except for U.S.A.
Short press adjustment: By 1 km/h
(0.6 mph) or 1 mph (1.6 km/h) each
time the switch is pressed
Long press adjustment: Increases
Owners Manual_USA_M04041_en
or decreases in 5 km/h (3.1 mph) or
5 mph (8 km/h) increments continu-
ously while the switch is pressed
and held
■
Increasing the set vehicle
speed using the accelerator
pedal
1
Depress the accelerator
pedal to accelerate the vehi-
cle to the desired vehicle
speed.
2
Press the "+" switch.
■
Canceling/resuming control
1
Press the cancel switch or
driving assist switch to cancel
control.
Control will also be canceled if the
brake pedal is depressed.
(If the vehicle has been stopped by
system control, depressing the
brake pedal will not cancel control.)
2
Press the "RES" switch to
resume control.
■
Changing the vehicle-to-
vehicle distance
Each time the switch is pressed,
the vehicle-to-vehicle distance
setting will change as follows:
If a preceding vehicle is detected,
the preceding vehicle mark
will
Advertisement
Table of Contents
