Table of Contents
Advertisement
354
4-5. Using the driving support systems
Things you should know
If you notice any symptoms
If you notice any of the following symptoms, refer to the likely cause
and the solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle
inspected by your Toyota dealer.
Symptom
The image is difficult to
see
The image is blurry
The image is out of
alignment
Owners Manual_USA_M04041_en
Likely cause
The vehicle is in a dark
area
The temperature
around the lens is
either high or low
The outside tempera-
ture is low
There are water drop-
lets on the camera
It is raining or humid
Foreign matter (mud,
etc.) is adhering to the
camera
Sunlight or headlights
are shining directly
into the camera
The vehicle is under
fluorescent lights,
sodium lights, mer-
cury lights, etc.
Dirt or foreign matter
(such as water droplets,
snow, mud, etc.) is
adhering to the camera.
The camera or sur-
rounding area has
received a strong
impact.
Solution
Back up while visually
checking the vehicle's
surroundings. (Use the
monitor again once con-
ditions have been
improved.)
The procedure for
adjusting the picture
quality of the parking
assist monitor is the
same as the procedure
for adjusting the screen
display. (Refer to the
"MULTIMEDIA
OWNER'S MANUAL".)
Flush the camera with a
large quantity of water
and wipe the camera
lens clean with a soft
and wet cloth.
Have the vehicle
inspected by your Toy-
ota dealer.
Advertisement
Table of Contents
