Toyota Tacoma 2024 Manual page 392

Table of Contents

Advertisement

394
4-5. Using the driving support systems
The rear view & dual side view
and the wide rear displays can
be switched by touching the
screen.
When the front-wheel
drive control switch is in
"2H", or "4H" and Multi-
terrain select is OFF
The panoramic view monitor is
displayed. (P.356)
Automatic display mode
When automatic display mode is
Screen display and functions
The front-wheel drive control switch in the case of "4L", or "4H" and
Multi-terrain select is ON, the Multi-terrain Monitor can display a
screen suitable for off-road.
Front view & dual side view
Front view & dual side view can be used to check the area around
the front of the vehicle.
 In addition to an image of the front of the vehicle, guide lines are
displayed in a composite view to provide reference for when
deciding a direction to move forward in.
 If the steering wheel is turned 270° or more, guide lines and other
Owners Manual_USA_M04041_en
turned on, the Multi-terrain Mon-
itor screen is displayed in the
following conditions, even if
has not been operated.
• When the shift lever is shifted
to D, N (automatic transmis-
sion) or with the parking brake
disengaged (manual trans-
mission).
• When vehicle speed is
reduced to approximately 10
mph (16 km/h) or less.
The automatic display mode
switches between on and off each
time
is selected. When auto-
matic display mode is on, an indi-
cator illuminates on the icon.
Even when automatic display
mode is on, the display can still be
switched by pressing
.

Advertisement

Table of Contents
loading

Table of Contents