10.2 Sensor Assembly Installation
The following procedure describes how to secure the Sensor Assembly to the Car Top Frame C-
Channel.
NOTE: Exact positioning and lengths of the Unistrut can be adjusted as needed if the Sensor
Array is positioned as shown in Figure 161.
1. Cut the lengths of Unistrut as follows:
• Two 18"
• One 24"
2. Bolt the two 18" lengths of Unistrut to the C-Channel.
October 25, 2021
Figure 161: Unistrut Installation
©2021 Smartrise Engineering, Inc. All Rights Reserved
C4 User Manual
Page 119