Xr60T; Xr30T; Technical Specifications - Emerson DIXELL XR30T Installing And Operating Instructions

17.2 XR60T

17.3 XR30T

18. TECHNICAL SPECIFICATIONS

FEATURES
Housing
Dimensions
Mounting device
Degree of Protection
Power Supply
Overvoltage Category
Rated Power
Rated Impulse Voltage
Display
Buzzer
Software Class
Terminal blocks / Terminal
Connections
Data Storing
Type of Action
Pollution Degree
Ambient Operating Temperature
and Humidity
Shipping and storage
temperature
Resistance to Heat
Measurement range
Accuracy
Inputs
Relay Outputs
1592040000 XR30-60-70T EN v1.3 2020.08.26
DESCRIPTION
Self-extinguishing PC
Front fascia 38x80 mm; case depth 81mm
Panel, 71x29mm panel cut-out
NEMA – UL 50e
IP-IEC/EN 60529
230Vac 10%, 50/60Hz; 110Vac 10%, 50/60Hz; 100 to 240VAC10%, 50/60Hz
II
12VAC: 3VA; 110VAC: 4VA; 230VAC: 4VA; 100-240VAC: 3VA
2500V
White display, LED type, 3 digits with decimal point and multi-function icons
Internal, always present
A
Plug-in or screw terminal block, wire section between 0,5 and 2,5 mm
Max tightening force: 0.3 N/m for 3,5mm pitch, 0.4 N/m for 5,0mm pitch
Real Time Clock: Data maintenance up to 6 months with lithium battery. Other parameters: internal flash.
1.B
2, non-condensing humidity
IEC/EN 0T60°C; 20-85 rH% (non-condensing humidity)
UL-CAN/CSA -20T60°C; 20-85 rH% (non-condensing humidity)
-40T85°C; 20-85 rH% (non-condensing humidity)
UL 94 V-0
NTC: -40T110°C, resolution 0.1°C or 1°C (selectable); PT1000: -100T150°C, resolution 0.1°C or 1°C (selectable);
PTC: -50T150°C, resolution 0.1°C or 1°C (selectable)
±1% compared to the full scale
Up to 4 NTC, PTC or PT1000 (configurable); Up to 2 voltage free contacts
Nominal
Resistive load 12A (NO), 230Vac, 50K cycles
SPST 16A, Motor load 240Vac (NO), 10FLA/60LRA, 30K
oA1
250Vac
SPDT 8A, Resistive load 10A (NO), 120/240Vac, 30K cycles
oA2
250Vac Motor load ½ HP (NO), 240Vac, 30K cycles
Power Supply: 110VAC, 230VAC or
100-240VAC, 50-60Hz
oA1: always set as main compressor
output (CP1)
Power Supply: 110VAC, 230VAC or
100-240VAC, 50-60Hz
oA1: always set as main compressor
output (CP1)
Indoor use only, Type 1 enclosure
Front panel: IP66
UL
cycles
Pilot Duty B300 (NO), 6K cycles
XR30-60-70T
Rear Housing: IP00
2
IEC
10(4)A (NO), 230Vac, 100K cycles
8(3)A (NO), 230Vac, 50K cycles
37/40