Table of Contents
Advertisement
UL Ratings
Type
Relay 1 (N.O. & N.C.)
Relay 2 (N.O. & N.C.)
Relay 3 (N.O. & N.C.)
Relay 4 (N.O. & N.C.)
Table - 3 - UL Ratings
Housing Dimensions and Mounting
The Site Supervisor is DIN Rail mounting compatible. Snap the orange tabs on the back of the unit to the down position to fasten. If not using the DIN
Rail mounting option, fasten to the mounting surface using the openings in the mounting tabs.
Technical Specifications
5A, 125/240 VAC, General Purpose, 100K cycles;
4FLA/4LRA, 250VAC, Motor Load, 100K cycles;
5A, 125/240 VAC, General Purpose, 100K cycles;
4FLA/4LRA, 250VAC, Motor Load, 100K cycles;
5A, 125/240 VAC, General Purpose, 100K cycles;
4FLA/4LRA, 250VAC, Motor Load, 100K cycles;
5A, 125/240 VAC, General Purpose, 100K cycles;
4FLA/4LRA, 250VAC, Motor Load, 100K cycles;
Figure 12 - Site Supervisor Dimensions
Operating Temperature
Relative Humidity
Enclosure Rating
Dimensions
24 VAC
1 Can Bus
4 RS485 ports
3 Ethernet ports
2 USB ports
MicroSD
Analog Inputs
Digital Inputs
Relay Outputs
Table - 4 - Technical Specifications
Ratings
14°F to 140°F (-10°C to 60°C)
20-85% RH non-condensing
UL 94 V-0
103.7 x 34.7mm
20VA required
24VAC/20VA
Expansion Module Connections
MODBUS Com Ports 1, 2, 3, and 4
Ports 1, 1, 0
1, 2
1
8
4
4
Terminal
J5-2, J5-3, J5-4 (Base Board)
J5-1, J5-2, J6-6 (Base Board)
J6-1, J6-4, J6-5 (Base Board)
J6-1, J6-2, J6-3 (Base Board)
Advertisement
Table of Contents
