Safety; Disclaimer - ROBOTIQ POWERPICK20 Original Notice

2.Safety

2.1 .Disclaimer

Caution
Any user of the Robotiq PowerPick20 must have read and understood all of the instructions in the following section
before operating it.
It is the installer/operator's responsibility to ensure that all local safety measures and regulations are met.
The intent of this section is to provide general guidelines for safe use of the PowerPick20 vacuum gripper.
Always follow local regulations.
The installer is responsible for the safe installation and commissioning of the PowerPick20 vacuum gripper.
Robotiq accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.
The user (installer and operator) shall observe safe and lawful practices including but not limited to those set forth in this
document.
The term operator refers to anyone responsible for any of the following operations on the Robotiq Vacuum Gripper:
Installation
l
Control
l
Maintenance
l
Inspection
l
Calibration
l
Programming
l
Decommissioning
l
This manual covers the various components of the PowerPick20 vacuum gripper and the general operations regarding the whole
life-cycle of the product, from installation to operation and decommissioning.
The drawings and photos in this manual are representative examples. However, discrepancies may be observed between the
visual supports and the actual product.
Warning
Any use of the PowerPick20 vacuum gripper in non-compliance with these instructions is deemed inappropriate and may
cause injury or damage.
PowerPick - Instruction Manual
9