Table of Contents
Advertisement
Comply with the guidelines, laws, rules and
❯
regulations applicable at the site of operation
when you use this unit.
Prior to each use, check the function and
❯
proper condition of the device.
Do not convert or modify the unit.
❯
Comply with the Installation and Operating
❯
Instructions.
Make the Installation and Operating Instruc-
❯
tions always available to the operator in the
vicinity of the device.
2.4
Specialist personnel
Operation
Persons operating the unit must ensure safe and
correct handling based on their training and
knowledge.
Instruct or have every user instructed in han-
❯
dling the unit.
Installation and repairs
All installation, resetting, alteration, expansion,
❯
and repair work must be carried out either by
Air Techniques personnel or by a suitably quali-
fied person approved by Air Techniques.
2.5
Protection from electric
shock
Working on the unit, comply with all the rele-
❯
vant electrical safety regulations.
Never touch the patient and unshielded plug
❯
connections or metallic parts of the device at
the same time.
Immediately replace any damaged cables or
❯
plugs.
Comply with the EMC rules concerning
medical devices
The unit is intended for use in professional
❯
healthcare facilities (in accordance with IEC
60601-1-2). If the unit is operated in any other
environment, potential effects on the electro-
magnetic compatibility must be taken into
account.
Do not use the device near HF surgical devices
❯
and MRI equipment.
Keep a minimum distance of 30 cm between
❯
the device and other electronical devices.
Note that cable lengths and cable extensions
❯
have effects on electromagnetic compatibility.
2144100140L29
G8802
2310V007
No maintenance measures are required to
❯
maintain the basic EMC safety.
NOTICE
Negative effects on the EMC due to
non-authorized accessories
Use only Air Techniques accessories or
❯
accessories approved by Air
Techniques.
Using any other accessories may result
❯
in increased electromagnetic interfer-
ence emissions or the unit having
reduced electromagnetic immunity,
leading to an erroneous operation
mode.
NOTICE
Erroneous operation mode due to use
immediately adjacent to other devices
or with other stacked devices
Do not stack the unit together with
❯
other devices.
If this is unavoidable, the unit and other
❯
devices should be monitored in order
to ensure that they are working cor-
rectly.
NOTICE
Reduced performance features due to
insufficient distance between unit and
mobile HF communication devices
Keep at least 30 cm distance between
❯
the unit (including parts and cables of
the unit) and mobile HF communica-
tion devices (wireless units) (including
their accessories such as antenna
cables and external antennas).
2.6
FCC note
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a resi-
dential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
Important information
EN-US
|
5
Advertisement
Table of Contents
