Table of Contents
Advertisement
Important information
1
About this document
These installation and operating instructions are
an integral part of the unit.
Air Techniques shall not be held liable and
offers no guarantees of the safe and
smooth operation of this unit if you fail to
comply with notes and instructions con-
tained in these Installation and Operating
Instructions.
The German version of the installation and oper-
ating instructions is the original manual. All other
languages are translations of the original manual.
These operating instructions apply to:
ScanX Swift 2.0, Article number: G8800
(2144100510 / XPS07.1A1)
1.1
Warnings and symbols
Warnings
The warning notes in this document highlight
possible injury to persons or damage to machi-
nery.
They are marked with the following warning sym-
bols:
General warning symbol
The warnings are structured as follows:
SIGNAL WORD
Description of type and source of
danger
Here you will find the possible conse-
quences of ignoring the warning
Follow these measures to avoid the
❯
danger.
The signal word differentiates between different
levels of danger:
– DANGER
Direct danger of severe injury or death
– WARNING
Possible danger of severe injury or death
– CAUTION
Risk of minor injuries
– NOTICE
Risk of extensive material/property damage
2144100140L29
G8802
2310V007
Miscellaneous symbols
These symbols are used in the document and on
or in the unit:
Note, e.g. specific instructions regarding
the efficient use of the unit.
Part number
Serial number
Medical device
Batch name
Health Industry Bar Code (HIBC)
Model number
CE mark
Manufacturer
Distributor
Date of manufacture
Dispose of correctly in accordance with
EU Directive 2012/19/EU (WEEE).
Take note of the accompanying electronic
documents.
Refer to Operating Instructions.
Wear hand protection.
Disconnect all power from the unit.
Do not reuse
DC current
Important information
EN-US
|
3
Advertisement
Table of Contents
