Table of Contents
Advertisement
Operating elements
1
2
1
On/off switch
2
Confirmation key
3
Display
On/off switch
The On/Of button indicates different states of the
device:
Device off
Press the On/Off button to start the
device.
The device starts up or is ready for use
The start screen is displayed as soon
as the device is ready for use.
Confirmation key
The confirmation key is used to acknowledge
messages on the display. The key flashes when a
message is displayed that needs to be acknowl-
edged.
Display
The display shows information that is made avail-
able by the imaging software.
Connections
The connections are located on the rear of the
unit, underneath the cover.
2144100140L29
G8802
3
2310V007
1
2
3
4
1
USB port (additional accessories)
2
Network connection
3
Reset button
4
Connection for power supply unit
5.2
Phosphor storage plate
The PSP stores X-ray energy, which is re-emitted
in the form of light after excitation by the laser.
This light is then converted into image informa-
tion in the phosphor storage plate scanner.
The PSP has an active side and an inactive side.
The PSP must always be exposed on the active
side.
When used properly, a PSP can be exposed,
read and erased several hundred times provided
there is no mechanical damage. The PSP must
be replaced if there are any signs of damage, e.g.
if the protective layer is damaged or there are
visible scratches that could interfere with the
diagnostics.
Intraoral
Inactive side
2
IDX
back
Product description
Active side
EN-US
|
17
Advertisement
Table of Contents
