Message Alert - VTech mi6879 User Manual

Answering system operation
Purpose
Record memo
Review remote access code
Change remote access code
Turn system off
Turn system on

Message alert

The message alert function produces an audio tone to remind you that there are new messages on
the answering system
 Press SETUP three times and you will hear "Message alert. To change the setting, press
CHANGE."
2 Press CHANGE to confirm the current status; on or off is also displayed on the message
window
3 Press CHANGE again to change the setting
4 Press SETUP to save and advance to the next menu option or press PLAY/STOP
and exit
Press Action
8
Press after hearing the beep Speak after the system
announces "Record after the tone. Press STOP when you
are done." Start recording your memo Press 5 to stop
#9
Listen to current remote access code
*9 after press *9, enter 2 digits for your new remote access
code
0
When the system announces, "Answering machine off,"
press 0 again to turn the system back on
0
When the system is off, it answers after 0 rings and
announces, "Please enter your remote access code."
Enter your remote access code
www.vtechphones.com
• Your telephone
may not respond
to remote access
commands if
tones produced
by the telephone
from which you
are calling are
too short Hold
the buttons down
longer if this
occurs
• If accessing
from a touch
tone telephone,
press #5 to stop
recording
/ to save
4