Table of Contents
Advertisement
Telephone operation
Call transfer
An external call can be transferred from telephone base to handset, from handset to handset, or from
handset to telephone base
• The person at a handset or telephone base can transfer an external call to another handset or
telephone base by pressing INT (SPEAKER or INT/FIND HANDSET on the telephone base) The
external call is put on hold automatically
• Select the handset number to be transferred (-4 or 0 for the telephone base )
• The destination handset or telephone base will ring and the screen will show HANDSET 1 IS
CALLING
• Pick up the transferred call on the destination handset by pressing
• The people at the two handsets/telephone base will be able to talk to each other Either party can
hang up, allowing the conversation with the external person to resume CALL TRANSFERRED
will briefly be displayed on the originating handset.
If the transferred call is not answered within 00 seconds, the intercom attempt will be automatically
ended and the external call will return to the originating handset
Conference call
It is possible to establish a conference call between any two handsets
(or a handset and the telephone base) and the external line
If the telephone base or a handset is already connected to the external
line, the telephone base or a handset can join the call by pressing
SPEAKER on the telephone base or
call will immediately be established The screens will show:
Intercom/find handset
If you cannot find your handset(s) press INT/FIND HANDSET on the telephone base to page the
handset(s) for up to 60 seconds
• When the handset is not being used, press INT/FIND HANDSET
• Press dialing keys to select the destination handset number
on a handset A conference
www.vtechphones.com
, SPEAKER or INT
SPEAKER 00:00:25
• To activate
the INT/FIND
HANDSET
function,
the system
handsets need
to be in idle (off)
mode
3
Advertisement
Table of Contents
