Registration 0; To Register A Handset 0 - VTech mi6879 User Manual

Registration
The mi6879 comes with one registered handset (named Handset 1) Additional handsets will be assigned
numbers in the order they are registered (Handsets 2, 3, and 4) You can register a maximum of four
• When first
handsets
purchased, you
need to charge
Additional handsets (mi6807) are available from your local authorized dealers or from our website
your handsets
at www.vtechphones.com in the U S , or www.vtechcanada.com in Canada
for five minutes
Up to four extension handsets can be registered with the same telephone base, and two can be in
before registering
operation at the same time Each additional handset purchased will have to be registered separately
to the telephone
following the instruction which comes with the optional handsets
base
• The handset
To register a handset
number is used
as the extension
When first purchased, all accessory handsets show NOT REGISTERED
number
on the screen To register a handset:
• If the registration
 Place the handset in its charger (connected to a power outlet ) If PRESS
is not successful,
lift all handsets
out of their
2 On the main telephone base,
telephone base
or charger and
place them
back in the
telephone base
or charger Try
the registration
process again
After about 0 seconds the handset will emit a tone and the handset will be assigned the lowest
extension number not previously assigned to another system handset (-4) when successfully
registered Repeat steps  and 2 if handset is not registered within two minutes
0
FIND HNDST 4 SEC ON BASE does not appear on the screen after a
few seconds, lift up handset and place in the charger again
• Press and hold INT/FIND HANDSET key for four seconds
• Release INT/FIND HANDSET key when IN USE light is on
www.vtechphones.com
Four
seconds
later:
NOT REGISTERED
PRESS FIND HNDST
4 SEC ON BASE