Table of Contents
Advertisement
Answering system operation
Announcements
When playback begins, the total number of messages will be announced
2 Before each message, the day and time it was received will be announced
3 After the last message the system will announce, "End of messages."
4. If the system has less than five minutes of recording time left, the time remaining will also be
announced
Options during playback
Press
and
to adjust the speaker volume
2 Press SKIP
once to skip to the next message, or press and hold to speed up the message
playback, using the voice prompt of day and time as index
3 Press REPEAT
to repeat the message currently playing Press twice
to listen to the previous message, or press and hold to slow down the
message playback process
4 Press DELETE X to delete the message currently playing
5 Press PLAY/STOP
to stop playback
Delete all messages
To delete all messages, press and hold DELETE X while the telephone is idle (not during a call or
during message playback) to delete all old messages New messages (which have not been reviewed
before) will not be deleted
www.vtechphones.com
• The number of
messages in the
oval message
window flashes
when there are
new messages
The number in the
message window
is on steadily
when there are no
new messages
• While the
telephone base
is idle (off),
press the VOL
and
buttons
to change the
telephone base
ringer volume
While listening
to an incoming
message or
message
playback, press
the VOL
and
buttons to change
the listening
volume
37
Advertisement
Table of Contents
