Ringer Volume 8; Ringer Tone 8; Key Tone 8 - VTech mi6879 User Manual

Telephone settings
Ringer volume
• With the telephone base in idle (off) mode, press MENU then
• The handset will
• Press SEL. You will hear a sample of the ringer
not ring when a
• Press
call comes in if
the ringer volume
is at the lowest
setting
• Settings for the
-OR-
handset and
• With the telephone base in idle (off) mode, pressing
the telephone
base must be
• Press
programmed
separately For
example, when
Ringer tone
you set the ringer
• With the telephone base in idle (off) mode, press MENU, then
volume for the
handset, it will not
be automatically
• Press SEL Then press
set in the
telephone base
• Key tone is preset
• Press SEL to confirm.
to ON
Key tone
• With the telephone base in idle (off) mode, press MENU, then
• Press SEL The current setting will be shown Press
• When the desired option is shown, press SEL
8
press or until RINGER VOLUME is shown
, or a digit (0 through 6) You will hear a sample of
the new ringer volume and the volume bar will be increased or
decreased each time the setting is adjusted At the lowest setting,
the ringer will be turned off and the display will show:
the volume control will go directly to the ringer volume menu
or of the volume control to adjust the ringer
volume
until RINGER TONE is displayed
press or
hear a sample of the ringer tone and you will see the number of
that ring tone (0 - 9)
press or until KEY TONE is displayed
see ON or OFF When set to on, the telephone base will emit a
beep whenever a key is pressed
www.vtechphones.com
, or a digit (0 through 9) You will
>RINGER VOLUME
RINGER TONE
RINGER VOLUME
or of
>RINGER VOLUME
>RINGER TONE
KEY TONE
>KEY TONE
OFF
or to