Turn The Call Screening On Or Off; Turn The Message Alert Tone On Or Off - VTech DS6291 User Manual

Turn the call screening on
or off
Use this feature to choose whether
incoming messages can be heard while
they are being recorded.
Using a cordless handset or the
telephone base:
1. When the handset or telephone base
is in idle mode,
MENU
press to enter the main menu.
2. Press or on the handset, or
CALLER ID / or PHONEBOOK /
on the telephone base to scroll to
Answering sys, then press SELECT.
3. Press or on the handset, or
CALLER ID / or PHONEBOOK /
the telephone base to scroll to Ans
sys setup, then press SELECT.
4. Press SELECT
screening.
5. Press or on the handset, or
CALLER ID / or PHONEBOOK /
the telephone base to choose On or
Off.
SELECT
6. Press
You hear a confirmation tone.
to select Call
to save the setting.
Turn the message alert tone on
or off
When the message alert tone is set to
on, and there is at least one new
message, the telephone base beeps
every 10 seconds. The message alert
tone is preset to off.
Using the handset or the telephone
base:
1. When the telephone base is in idle
mode, press
menu.
SELECT
2. Press
Answering sys.
3. Press
CALLER ID /
on
the telephone base to scroll to
Ans sys setup, then press SELECT.
4. Press
CALLER ID /
the telephone base to scroll to
Msg alert tone, then press SELECT.
on
5. Press
CALLER ID /
the telephone base to choose
On or Off.
SELECT
6. Press
You hear a confirmation tone.
NOTE
The answering system must be turned on for
the message alert tone to be functional.
50
MENU
to enter the main
to select
or on the handset, or
or PHONEBOOK /
or on the handset, or
or PHONEBOOK /
or on the handset, or
or PHONEBOOK /
to save the setting.
on
on
on